fbpx
+(632) 8733-8030 to 33
mail@zenithunited.com
Shop
Electrical, Lighting & Ventilation Solutions

Archive for September, 2014

Ex-Proof Flashing Beacon

Posted on: September 20th, 2014 by admin No Comments
WERMA’s manual call systems function according to the same principle: when an optical or audible signal is activated, the supervisor or logistics employee is made aware of the fact that an immediate response is required. Each workstation that is equipped with these products enables the employee to precisely and instantaneously signal which type of issue has occurred at the touch of a button.

Features:
– A simple call system for various applications such as manual workstations.
– Instant status display at the touch of a button to aid process optimization.
– Smart electronics enable the activation of up to eight different states.
– For use with an integral signal tower.
– Simple installation as no additional cable is required.
– Universal power supply and interchangeable adapters enable worldwide use.
Contact us for more information.
Werma, signaling devices, ex-proof, ex-proof flashing beacon, 720 ex-proof

HID Ballast

Posted on: September 20th, 2014 by admin No Comments
Contact us for more information.
Contact us for more information.
universal lighting technologies, UL technologies, ballast, HID ballasts, HID ballast, high intensity discharge ballast,

Polypropylene Blade Series

Posted on: September 19th, 2014 by admin No Comments
A very compact fan with non-protruding motor and equipped with polypropylene fan blades. The steel wall mounting plates is epoxy coated. Stainless steel motor supports. Totally enclosed direct drive motors, greased for life, maintenance-free ball bearings according to IEC34-1 standard, is designed for continuous running. An integral overheat protector is fitted in all motors.

The wiring box conforms to IP55 standard, with capacitors, is connected by a 7 core cable of approximately 80 cm. length to the motor. Insulation Class: F.
Contact us for more information.
indola, polypropylene blade series, general purpose fans

Stainless Steel Blade Series

Posted on: September 19th, 2014 by admin No Comments
Equipped with 4 stainless steel fan blades (6 stainless steel blades for VDBZ 500) and stainless steel motor supports. Wall mounting plate is gray epoxy powder-coated steel. Both robust constructions are for heavy duty applications. Inside rotor motors with fully enclosed ball bearings, greased for life, conforms to IEC 34-1 standard. An integral overheat protector is fitted in all motors. IP54 for all models. Insulation Class: B.
Contact us for more information.
indola, stainless steel blade series, general purpose fans

Touch Screens

Posted on: September 19th, 2014 by admin No Comments
– 65,536 Color LCD
– High Resolution Display:
800 x 600 (8.4”, 10.4”, 12.1”) , 640 x 480 (5.7”)
– Super Bright: up to 800cd/m2
– Mounts Portrait or Landscape
– Remote Access, Monitor and Control
– Audio and Video Interface (8.4”, 10.4”, 12.1”)
– Supports Expansion I/O Modules
– Serial, Ethernet and USB ports
Contact us for more information.
idec, control and automation, smart relay

Timers

Posted on: September 19th, 2014 by admin No Comments
– Various time ranges (0.01 sec to 180 hours: depends on the model).
– Multiple operating modes (depends on the model) ON delay, Interval ON, Flicker and One Shot.
– High accuracy and compact size.
– Power and timing out LED indicators.
– Worldwide approvals.
Contact us for more information.
timers, control & automation, IDEC

Smart Relay

Posted on: September 19th, 2014 by admin No Comments
Create, simulate, test and save your program in just a matter of seconds using drag and drop functions. Each Smart Relay is equipped with 8 digital inputs for you to utilize in your applications. These all-in-one controllers require less space in your control cabinet. And as you know, space in your panel is money in your pocket. Combine that with low maintenance and you’ve got a cost-effective product you can count on for all your control operations.
Contact us for more information.
idec, control and automation, smart relay

Power Supply

Posted on: September 19th, 2014 by admin No Comments
– Compact and light weight.
– Universal input.
– Wide power range: 10W to 240W.
– Meets SEMI F47 Sag immunity (120W & 240W).
– DIN rail or surface mount. Optional mounting bracket available for panel surface mount.
– Over current & over voltage protection.
– IP20 finger-safe, spring-up screw terminals.
– RoHS compliant.
– CE marked, TUV, c-UL, UL508, UL1310, UL1604
Contact us for more information.
power supply, power supplies, control & automation, IDEC

PLC

Posted on: September 19th, 2014 by admin No Comments

FC5A SERIES pentra-MicroSmart
– Two types of CPU models: All-in-one and slim.
– AC or DC models ( 100-240V AC, 24V DC or 12-18V DC).
– Expand up to 512 I/O (slim type), 88 I/O (All-in-one) * 12-18V DC CPUs are NOT EXPANDABLE.
– Maximum communications ports: SEVEN (slim type) and FIVE (All-in-one).
– Built-in MODBUS Master and Slave protocols and ASCII communications.
– Floating-point math with double-word calculations.
– HSC and PULSE outputs: Max 100KHz
– DIN rail or surface mounting.
– Class 1 Div 2 rated for hazardous locations (UL1604) and Lloyd’s approval for marine applications.

FC4A SERIES- MicroSmart
– Two types of CPU modules: All-in-one and slim.
– AC or DC models (100-240V AC or 24V DC).
– Expand up to 264 I/O (slim type), 88 I/O (All-in-one).
– One built-in RS232 communications port (can be expanded to a maximum of 2 ports).
– ASCII and MODBUS communications.
– DIN rail or surface mounting.
– Class 1 Div 2 rated for hazardous locations (UL1604) and Lloyd’s approved for marine applications.
– Worldwide approvals.
Contact us for more information.
PLC, control & automation, IDEC

Multipolar Connector

Posted on: September 19th, 2014 by admin No Comments
The multipolar connectors of the 76 CO Range are made so as to ensure electrical, power and signal connection in all industrial environments, even in the presence of chemical and mechanical agents or thermal stresses. The breadth of the range – with more than 500 codes – meets all application needs as far as industrial plants, automation lines, applications in the field of robotics and on board machinery is concerned.
Contact us for more information.
gewiss, multipolar connector

Junction box

Posted on: September 19th, 2014 by admin No Comments
GUBB
– Explosion-proof and dust-ignition proof, for use in classified locations.
– Corrosion-resistant: ideal indoors or outdoors.
– Junction or pull box for pulling and splicing of wires and as an enclosure for electrical devices.
– Ideal where number and size of conductors require a junction box with additional space.

AJBEW
Explosion-proof junction boxes are used where hazardous materials are handled or stored. These enclosures may be used for:
– Terminals
– Splicing wires
– Pull boxes
– Bus boxes

Features
GUBB Series
– Wide selection of sizes and locations for drilled and tapped conduit openings.
– Suitable for use as an enclosure for relays, instrument and other control apparatus in classified locations.
– Available in high tensile strength malleable iron or copper-free aluminum bodies.
– Provided with mounting lugs.
– O-Rings standard for forms 1, 2 and 3 to provide rain-tight fit.

AJBEW
– Precision machined flame path between box and cover.
– Bolt on stainless steel slotted mounting feet for horizontal or vertical mounting.
– Flexible hinge mounting either left or right side is standard on all boxes 12 x 12 x 06 and larger.
– External flange maximizes internal space.
– Wall thickness suitable for minimum of five full threads.
– Provision for mounting pan.
– Wide range of drilled and tapped outlets.
– Ground lug package and installation instructions for termination of ground wires enclosed.
– O-ring gasket insures watertight integrity.
Contact us for more information.
appleton, junction box, junction boxes, AJBEW, GUBB

Ex-proof Control Station

Posted on: September 19th, 2014 by admin No Comments
Combi & Selector Switch
– Push buttons and selector switches are used in conjunction with contactors or magnetic starters for remote control of motors. They provide circuit control and/or selection.
– Pilot lights provide visual assurance that an electrical function is being performed at a remote or local location
– Confine arcing of device within the enclosure, preventing ignition of ignitable atmospheres during control operation of motors and other equipment.
– Used in classified areas where flammable vapors, gasses or highly combustible dusts are present.

For installation in:
— Chemical plants
— Petrochemical plants
— Refineries
— Other process industries
— Where corrosive elements are present

Tumbler Switch
Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect operation of lighting and light power loads.For use in classified areas where ignitable vapors, gases or highly combustible dusts are present.

For installation in:
– Chemical plants
– Petrochemical plants
– Refineries
– Other process industries
Contact us for more information.
appleton, fittings, ex-proof control station, tumbler switch, pilot switch, push button combination, selector switch

HEAD OFFICE

2/F Le Mar Ben II Bldg., 747 San Bernardo St.
Sta. Cruz, Manila, 1003 Philippines

T. +(632) 8733-8030 to 33; +(632) 8733-0378; +(632) 8733-03-66 to 68
M. +(63) 917-5581151; +(63) 925-5199106
F. +(632) 8733-0379

BRANCH

649 Florentino Torres St.,
Sta. Cruz, Manila, 1003 Philippines

T. +(632) 8733-8026 to 29; +(632) 8734-1148; +(632) 8736-5552
M. +(63) +(63) 917-5636152; +(63) 925-5199100
F. +(632) 8733-0383

International Business Partners & International Project Inquiries

T: +(632) 8733-4526 loc. 101
E: brian@zenithinternational.ph
E: projects@zenithinternational.ph

Zenith United Electric Corporation © Copyright 2024. All Rights Reserved.
Icons provided by LineIcons